problem in Attached SCSI removable disk

New to SolydXK? This is the place to start.
Please check the other subforums to see if there's a more suitable place for your question.
tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

problem in Attached SCSI removable disk

Postby tux-world » 05 Feb 2014 17:35

after attaching mobile or any removable disk i get this error in console.

thats dmesg result:

Code: Select all

[ 7684.293189] usbcore: registered new interface driver usb-storage
[ 7684.528997] udevd[13407]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 7685.291202] scsi 4:0:0:0: Direct-Access     SAMSUNG  GT-S5570 Card    0100 PQ: 0 ANSI: 2
[ 7685.291872] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 7685.293024] udevd[13408]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 7685.294202] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7685.299596] udevd[13412]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 7685.303037] udevd[13416]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 7685.593937] udevd[13428]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory
[ 7685.601790] udevd[13431]: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_event' 'socket:@/org/freedesktop/hal/udev_event': No such file or directory

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: problem in Attached SCSI removable disk

Postby ScottQuier » 05 Feb 2014 17:57

I saw similar error messages when I was experimenting with replacing sysvinit with systemd (see this --> http://forums.solydxk.nl/viewtopic.php?f=5&t=2114). Research seemed to indicate the hal is no longer being maintained and no longer served a useful purpose. I executed the following

Code: Select all

sudo apt-get remove --purge hal hal-info
sudo reboot
and everything ran just fine.

I'm not suggesting you do this in a production machine, but if you can duplicate into a testing environment it might be worth your time.
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"


Return to “Newbie Questions”

Who is online

Users browsing this forum: No registered users and 10 guests