printer icon in panel (SolydX): fix or remove?

Questions about hardware, drivers and peripherals.
In the Original Post please also include the output of inxi -Fzx
BillZM
Posts: 11
Joined: 22 Jun 2014 17:56

printer icon in panel (SolydX): fix or remove?

Postby BillZM » 02 Jul 2014 22:17

Running SolydX, I have Brother's MFC-7820N printer/scanner working well in network mode using Brother-provided debian drivers.

A minor annoyance is the printer icon (pic of printer with small settings gear) which appears in the panel notification area when I print a job. It remains during the entire session, regardless of job and printer status (which is reported back correctly in Printer Settings and Print Queue). Neither left-clicking or right-clicking is recognized by the icon, and it just stays there.

Suspending the session and starting up again will make the icon disappear but leave the hole where the icon was.

Shutting down and rebooting removes the icon completely.

It's a minor annoyance, but I wondered if others had seen this behavior and solved this. Any ideas? I'd like to either make the icon functional or make it go away.

Here is my system info.

inxi -Fzx
System: Host: hp110-1050nr-solydx Kernel: 3.14-1-686-pae i686 (32 bit, gcc: 4.8.3)
Desktop: Xfce 4.10.2 (Gtk 2.24.18) Distro: SolydXK 1 testing
Machine: System: Hewlett-Packard product: HP Mini 110-1000 version: 03A8100000000000100300000
Mobo: Hewlett-Packard model: 308F version: KBC Version 02.09
Bios: Hewlett-Packard version: 308F0 Ver. F.05 date: 05/11/2009
CPU: Single core Intel Atom CPU N270 (-HT-) cache: 512 KB flags: (nx pae sse sse2 sse3 ssse3) bmips: 3192.43
Clock Speeds: 1: 800.00 MHz 2: 1600.00 MHz
Graphics: Card: Intel Mobile 945GSE Express Integrated Graphics Controller bus-ID: 00:02.0
X.Org: 1.15.0 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x576@60.0hz
GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 GLX Version: 2.1 Mesa 10.1.0 Direct Rendering: Yes
Audio: Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.14-1-686-pae
Network: Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge bus-ID: 01:00.0
IF: wlan0 state: up mac: <filter>
Card-2: Qualcomm Atheros AR8132 Fast Ethernet driver: atl1c ver: 1.0.1.1-NAPI port: ec80 bus-ID: 02:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (2.2% used) 1: id: /dev/sda model: Hitachi_HTS54502 size: 250.1GB
Partition: ID: / size: 9.8G used: 5.0G (54%) fs: ext4 ID: /home size: 99G used: 281M (1%) fs: ext4
ID: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap
Sensors: System Temperatures: cpu: 62.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 150 Uptime: 1:11 Memory: 530.6/2015.9MB Runlevel: 2 Gcc sys: 4.8.2
Client: Shell (bash 4.3.0) inxi: 1.9.17

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 3 guests