Hello

New to SolydXK? This is the place to say "Hello"
User avatar
thunder236
Posts: 2
Joined: 06 Mar 2015 09:57
Location: poland
Contact:

Hello

Postby thunder236 » 06 Mar 2015 10:22

Hello everyone and thank zy support. My machine

Code: Select all

System:    Host: elico Kernel: 3.16.0-4-amd64 x86_64 (64 bit gcc: 4.8.4) Desktop: KDE 4.14.2 (Qt 4.8.6) 
           Distro: SolydXK 1 solydxk 
Machine:   System: Dell product: Precision WorkStation 490
           Mobo: Dell model: 0F9382 v: A00 Bios: Dell v: A08 date: 04/25/2008
CPU:       Dual core Intel Xeon (-HT-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 vmx) bmips: 11970 
           Clock Speeds: 1: 2000 MHz 2: 2000 MHz 3: 2000 MHz 4: 2000 MHz
Graphics:  Card: NVIDIA G71GL [Quadro FX 3500] bus-ID: 07:00.0
           Display Server: X.Org 1.16.4 driver: nvidia Resolution: 1024x768@60.00hz
           GLX Renderer: Quadro FX 3500/PCIe/SSE2 GLX Version: 2.1.2 NVIDIA 304.125 Direct Rendering: Yes
Audio:     Card Intel 631xESB/632xESB High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 
           Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64
Network:   Card: Broadcom NetXtreme BCM5752 Gigabit Ethernet PCI Express driver: tg3 v: 3.137 bus-ID: 0b:00.0
           IF: eth1 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 480.1GB (2.6% used) ID-1: /dev/sda model: WDC_WD1600JD size: 160.0GB
           ID-2: /dev/sdc model: Hitachi_HTS54161 size: 160.0GB
           ID-3: /dev/sdb model: WDC_WD1600AAJS size: 160.0GB
Partition: ID-1: / size: 30G used: 7.5G (27%) fs: ext4 dev: /dev/md0 
           ID-2: /home size: 260G used: 373M (1%) fs: ext4 dev: /dev/md2 
           ID-3: /boot size: 485M used: 38M (9%) fs: ext2 dev: /dev/sda1 
           ID-4: swap-1 size: 4.29GB used: 0.01GB (0%) fs: swap dev: /dev/md1 
RAID:      Device-1: /dev/md1 - active components: online: sda3[0] sdb2[1]
           Info: raid: 0 report: N/A blocks: 4190208 chunk size: 512k
           Device-2: /dev/md0 - active components: online: sda2[0] sdb1[1]
           Info: raid: 0 report: N/A blocks: 31440896 chunk size: 512k
           Device-3: /dev/md2 - active components: online: sda4[0] sdb3[1]
           Info: raid: 0 report: N/A blocks: 276151296 chunk size: 512k

User avatar
Arjen Balfoort
Site Admin
Posts: 9258
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Hello

Postby Arjen Balfoort » 06 Mar 2015 16:51

Please, prevent to be a suspected spammer and use this forum to introduce yourself instead of copying your terminal output.


SolydXK needs you!
Development | Testing | Translations

User avatar
thunder236
Posts: 2
Joined: 06 Mar 2015 09:57
Location: poland
Contact:

Re: Hello

Postby thunder236 » 07 Mar 2015 00:43

Please forgive me, I did not want to be mistaken for a spammer. I did not know too much what to write. I wanted to show my machine configurations and thank you for the forum, because it looks so, thanks to the information gained here. By nature I am a man, who speaks little :|

User avatar
Arjen Balfoort
Site Admin
Posts: 9258
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Hello

Postby Arjen Balfoort » 07 Mar 2015 10:41

Okay then...welcome to our forum, thunder236!
I hope you're going to enjoy your stay here.


SolydXK needs you!
Development | Testing | Translations

matt267
Posts: 24
Joined: 01 Mar 2013 00:04
Location: Rhode Island, USA

Re: Hello

Postby matt267 » 07 Mar 2015 11:04

welcome

User avatar
Zill
Posts: 1850
Joined: 13 Aug 2013 14:28
Location: Lincolnshire, UK

Re: Hello

Postby Zill » 07 Mar 2015 12:33

Po pierwsze, chciałbym dodać moje powitanie Ci dołączenie do nas na forach SolydXK. Naszym głównym językiem jest angielski, ale tutaj można użyć Google Translate, jeśli nie jesteś całkowicie zadowolony z wykorzystaniem języka angielskiego bezpośrednio.

Byłoby interesujące dla nas, aby dowiedzieć się więcej o swoim doświadczeniu Linux. Czy stosować żadnych innych dystrybucji Linuksa przed lub zacząłeś z SolydXK? Który smak SolydXK czy zainstalowane? (tj SolydX lub SolydK).

Jeśli masz jakiekolwiek problemy, a potem po prostu zakładać z powrotem na tych forach z czystym tytuł, a my postaramy się pomóc.

Jeśli pisać żadnych wyjście Terminal proszę pamiętać, aby ująć ją w "Kodeks" tagów, ponieważ sprawia, że łatwiej przeczytać:

Code: Select all

[code]przykładem tekst
[/code]------------------------------------------------------

Firstly, let me add my welcome to you joining us on SolydXK forums. Our primary language here is English but you can use Google Translate if you are not totally happy about using English directly.

It would be interesting for us to know more about your Linux experience. Have you used any other Linux distro before or have you started with SolydXK? Which flavour of SolydXK have you installed? (i.e. SolydX or SolydK).

If you have any problems then just post back on these forums with a clear title and we will try to help.

If you post any Terminal output please remember to enclose it in "code" tags as this makes it easier to read:

Code: Select all

[code]example text
[/code]


Return to “Introduce yourself”

Who is online

Users browsing this forum: No registered users and 2 guests