SolydXK 10 Testing [updated: 31-07-2019]

SolydXK is too quiet for you? SolydXK Enthusiast Editions, based on Debian Testing is for you! Here you can find news about Debian Testing and Unstable too, and also tests on SolydXK programs.
The support for SolydXK EE is provided by the community.
User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

SolydXK 10 Testing [updated: 31-07-2019]

Postby Arjen Balfoort » 24 May 2019 12:47

I have uploaded the release candidates.

You can download the ISOs here: https://downloads.solydxk.com/nightly/

If you have the time to test the ISO, please use the attached document below to report your findings.

I have also created and attached a script to upgrade a SolydXK 9 system to SolydXK 10.
It was tested with the 201902 ISOs but more testing is needed.
If you have problems with the script, please compress (tar or zip) the log file (~/solydxk10-upgrade.log) and attach it to your post.


Below I will keep a list of things that need to be done before releasing. Feel free to help out ;)

[TODO]
IN PROGRESS, DONE, WON'T FIX
  • Update: viewtopic.php?f=9&t=774
  • Chromium repeatedly asks for keyring password. (1)
    viewtopic.php?t=7585&p=70604#p70604
  • Exim4 service is enabled (not needed) (1)

    Code: Select all

    apt purge exim4*
  • OpenVPN service is enabled (not configured) (1)

    Code: Select all

    apt purge openvpn
  • FreshClam causes boot delay and service keeps running after disabling. (1)
    > Boot delay was caused by not being able to update the virus database on boot.
    Can be fixed in solydxk-system-adjust.service
  • Welcome screen - does not save selection when moving to another page. (1)
  • SolydX - wallpaper selector disabled (1)
    Don't know what he's talking about - I have no problem changing wallpapers.
  • Upgrade script - sudo apt-get --allow-releaseinfo-change update
    Add "Acquire::AllowReleaseInfoChange "true";" to /etc/apt/apt.conf.d/80solydxk-apt
  • ISO - unmount ISO in VM after installation when rebooting (low priority ).
    Use https://github.com/linuxmint/live-insta ... aller-stop.
    > This messes up upgrade of live-installer-3 in a live session.
  • ISO - kernel or lightdm issue: boot into blinking cursor or blanc screen.
    Found on reddit: https://www.reddit.com/r/debian/comment ... _blinking/
  • ISO - keyboard layout not set when selecting localized boot.
    Use kernel parameters: keyboard-layouts=de,en locales=de_DE.UTF-8
  • ISO - add country flag to localized boot menu items (low priority)
  • USB Creator - Add partitioning of USB.
  • Waterfox - no icon
    Icon path change in waterfox.desktop: /opt/waterfox/browser/chrome/icons/default/
  • Live Installer - pre-select language
    When booting into language, live installer does not pre-select that language resulting in error:

    Code: Select all

    Traceback (most recent call last):
      File "/usr/lib/live-installer-3/gtk_interface.py", line 350, in on_button_next_clicked
        self.wizard_cb(False)
      File "/usr/lib/live-installer-3/gtk_interface.py", line 993, in wizard_cb
        self.show_overview()
      File "/usr/lib/live-installer-3/gtk_interface.py", line 1164, in show_overview
        model.append(top, (_("Timezone: ") + bold(self.setup.timezone),))
      File "/usr/lib/live-installer-3/gtk_interface.py", line 1159, in <lambda>
        bold = lambda str: '<b>' + str + '</b>'
    TypeError: can only concatenate str (not "NoneType") to str
(1) https://distrowatch.com/weekly.php?issu ... 15#solydxk
Attachments
SolydXK ISO test cases.ods
(27.08 KiB) Downloaded 43 times
solydxk10.tar.gz
(2.17 KiB) Downloaded 60 times


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 24 May 2019 12:48

In SolydX 10 there is an issue with Thunar/GDebi: viewtopic.php?t=7531


SolydXK needs you!
Development | Testing | Translations

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 24 May 2019 18:51

There is also an issue with the Package updater icon in the tool bar.

viewtopic.php?f=78&t=7474

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 24 May 2019 19:21

troypulk wrote:
24 May 2019 18:51
There is also an issue with the Package updater icon in the tool bar.

viewtopic.php?f=78&t=7474
Did you check the preview ISO? I can see the icon.


SolydXK needs you!
Development | Testing | Translations

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 24 May 2019 19:46

No, what's the preview ISO?

Where is it?

I installed 10 a few months ago and have been just doing updates.

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 24 May 2019 21:11

Please, read the OP.


SolydXK needs you!
Development | Testing | Translations

User avatar
tek10
Posts: 42
Joined: 30 Jul 2013 01:22
Location: Cascadia

Re: SolydXK 10 Preview and Testing

Postby tek10 » 25 May 2019 16:36

I downloaded the Solydx ISO and verified the sha256sum. I was unable to boot into it in Virtualbox. Using dd to put on a usb also failed to provide a successful boot. I tried a second ISO download on a different computer and had the same issue.

At attempted boot the trials fail with: "FATAL: Could not read from the boot medium! System halted."

Will try Solydk next...

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 25 May 2019 18:29

I see...only EFI works.
I'll take a look at it asap.


SolydXK needs you!
Development | Testing | Translations

User avatar
escolar
Posts: 135
Joined: 23 Aug 2013 08:14
Location: Spain

Re: SolydXK 10 Preview and Testing

Postby escolar » 26 May 2019 18:16

tek10 wrote:
25 May 2019 16:36
I downloaded the Solydx ISO and verified the sha256sum. I was unable to boot into it in Virtualbox.
Same here

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 27 May 2019 07:41

I think I solved the legacy boot issue.

There is one thing I found: the integrity check on the legacy boot ends in an error while the integrity check (with the same parameters) in Grub ends successfully. I have only tested in Virtualbox. So, I cannot rule out VB. I've searched the net but didn't find anything at all.

Here's the error:
Screenshot_20190526_233005.png
You can download the new ISOs from the links in the OP.


SolydXK needs you!
Development | Testing | Translations

User avatar
just
Posts: 297
Joined: 07 Nov 2013 08:06
Location: Rovaniemi, Finland

Re: SolydXK 10 Preview and Testing

Postby just » 27 May 2019 14:38

This post is just to inform that SolydK 10 Nighlty boots and runs fine on a computer with Legacy BIOS.

Download location is given in the OP:
https://downloads.solydxk.com/nightly/

  • solydk_10_64_201905.iso
  • nightly build of 2019-05-27 08:38
  • LiveUSB was made with dd
No live session problems were encountered during a test run.

Regards

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 29 May 2019 03:52

I install solydx_10_64_201905.iso on a USB thumb drive using the USB Creator.

How do I test it?


When using the USB Creator what will it accomplish when it's finished?

Thanks

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 29 May 2019 06:59

Don't use the USB Creator for these ISOs.
Whatever I do, I always end up with a failed boot and the same text I mentioned above.


SolydXK needs you!
Development | Testing | Translations

User avatar
escolar
Posts: 135
Joined: 23 Aug 2013 08:14
Location: Spain

Re: SolydXK 10 Preview and Testing

Postby escolar » 29 May 2019 17:08

I can boot in VB with the new iso, but after a fast (normal) boot sequence the screen change to black and nothing happens in a long time. No error message. Finally I have to close the virtual machine.

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 29 May 2019 21:27

Odd, I can boot both ISOs normally in VB, but when I want to boot from USB (either with USB Creator or dd) I get the black screen.

When I boot the USB with the debug kernel argument, I see this in boot.log"
panic 'Unable to find a medium containing a live file system'
The boot ends in initramfs prompt. If I run "ls" to see what's there, everything seems fine.

I've been at it for the past two days and so far I haven't had any success.


SolydXK needs you!
Development | Testing | Translations

User avatar
tek10
Posts: 42
Joined: 30 Jul 2013 01:22
Location: Cascadia

Re: SolydXK 10 Preview and Testing

Postby tek10 » 30 May 2019 01:47

I've got a virtualbox install of SolydX10 that functions great after a couple shutdowns and some customization. Looks great!

I completed a hardware install to existing partitions on another system, and that was also a success. Installed on an AMD chipset with an A10 GPU. Live system and install worked fine. Used dd to a USB for the install.

Now I'm completing a new install using the edit partitions option and will try installing a bunch of stuff from the welcome screen as well as Synaptic. I'll go through the test spreadsheet and report results tomorrow.

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 30 May 2019 04:46

Arjen Balfoort » 28 May 2019 22:59

Don't use the USB Creator for these ISOs.
Whatever I do, I always end up with a failed boot and the same text I mentioned above.
I installed Solydx_10_64_201905.iso on a usb drive anyway and used USB-Creator that is on my PC now which is SolydX EE 10 64-bit that I installed a month or two ago.

Well anyway, it worked and I booted into the thumb drive live session and looked around.

The first time I used the USB-creator it froze when it was coping the ISO to the usb drive so I quit and deleted everything on the drive and started over.
The second time I started it from a console and everything worked as designed.

I had to put the ISO in my home folder to get the usb-creator to see the iso because it didn't see it when it was in a different folder.

Other than that the USB-Creator worked just fine.

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 30 May 2019 06:48

I cannot get any of them to boot from USB.
Tried with several pen drives, used dd, usb-creator and multiusb...no luck.

I cannot seem to find out why it's not working for me, but I'm happy you were able to install.
Although that adds to the mystery.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 31 May 2019 16:02

I've updated the ISOs.

I've decided to abandon usb-creator. It's too buggy and mostly it doesn't work. I still have the best results with dd. So, I removed usb-creator from the solydxk-10 ISOs and created a script to help users to write an ISO to USB from dolphin/thunar.

The script /usr/bin/iso-usb is provided by solydxk-system (check iso-usb -h to see more info) and the adjustments packages integrate it into dolphin/thunar. You just need to right-click an ISO to select the action. There is one minor inconvenience which I've posted on stackoverflow.

These ISOs now normally boot from USB (I used dd to do so) on my main machine but not from my laptop. I found a intel-microcode bug that exactly describes what happens on that laptop. If I ever find the time I will try to report a bug on Debian buster.

I tried to add the "dis_ucode_ldr" kernel line parameter as described here but that didn't change a thing.

Perhaps you might have noticed that the EFI Grub menu has been themed now. The live ISOs can now select your preferred locale before you boot the live session. This means that I don't have to build language specific ISOs anymore.

[EDIT]
For reference: I could boot the 201902 ISO on my laptop.
intel-microcode: 3.20180807a.2~deb9u1
linux-image: 4.9.0-8-amd64


SolydXK needs you!
Development | Testing | Translations

User avatar
grizzler
Posts: 2180
Joined: 04 Mar 2013 15:45
Location: The Hague, NL

Re: SolydXK 10 Preview and Testing

Postby grizzler » 31 May 2019 19:48

No full test reports yet, but I tried the live ISOs in a VBox VM and on USB (legacy hardware). No issues so far, neither booting nor checking the integrity of the medium.

To write the ISOs to USB sticks, I used the last version of UNetbootin that was available in Debian before it was removed (608-1) and that still worked OK. The boot menu looked a bit weird (had all available languages listed and some junk at the end). I'll try 661 from github later to see if that handles the menu better.

Edit
No, using 661 makes no difference. The menu seems OK until the last entry in the syslinux.cfg file and then starts again with heavily corrupted text. Some kind of buffer overflow? A menu with over 500 entries is a bit much...
The properly formatted bit does work, though. I tried the nl_NL entry and all texts came up in Dutch.
Frank

SolydX EE 64 - tracking Debian Testing


Return to “Testing Zone”

Who is online

Users browsing this forum: No registered users and 9 guests