How to fix an external ntfs formatted usb drive

Post your tutorials and howtos here.
User avatar
longtom
Posts: 215
Joined: 13 Mar 2013 19:53
Location: South Africa

How to fix an external ntfs formatted usb drive

Postby longtom » 15 Mar 2013 16:52

I had it a couple of times (and just now agian) that I had the following error message on some old usb stick or external drive:

Code: Select all

Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
You could do a chkdsk [drive] in Windows – but who has Windows? …

Seen before? I did. And reformatted that stick -loosing data etc etc.
Well- if you ever do – here is something which might help you:

Download ntfs tools (if not already installed):

Code: Select all

sudo apt-get install ntfsprogs
Next – go and fix it:

Code: Select all

sudo ntfsfix /dev/sdb1
assuming that sdb1 is your faulty drive. You can see that in the error message as above.

This should fix it.
Regards

longtom

Return to “Tutorials”

Who is online

Users browsing this forum: No registered users and 2 guests