Remastering SolydXK [adapted: 26 July 2019]

Post your tutorials and howtos here.
tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 23 Jan 2014 22:21

hello. yes sir. i dont newbie :) after chrooting on that. after install. service must be start but after setting up i get this error.
FIELD to start apache2.

after runing this command i cant switch on kde from chroot :

Code: Select all

startx -- :1

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 24 Jan 2014 07:50

Okay, let's do this one step at a time.

Start constructor, and unpack a SolydXK ISO (I took SolydK64 201311).
When done, select the unpacked distribution in the list, open the terminal (this is your chrooted environment), and run:

Code: Select all

apt-get update
apt-get install apache2
constructor1.png
You see, there are no errors while installing Apache:
constructor2.png
Close the window, and build the ISO, until you see this confirmation:
constructor3.png
constructor3.png (11.51 KiB) Viewed 5731 times
Start a virtual machine, and boot from this ISO. This is the live version, with the added Apache. When booted, you open Firefox, and type "localhost". You should see this picture:
constructor4.png
You'll probably need to add more packages (phpmyadmin, mysql, etc), but now you could install your custom SolydK, like you would with the normal ISO.

P.S.: There is no X in a chrooted environment. So, you cannot start it.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 24 Jan 2014 09:44

I see you are using the unreleased ISO versions.
The constructor hasn't been tested with them yet, and in these iso's, there were some configuration changes.

Go to the directory where you unpacked the ISO.
Open the file "iso_name", and make sure there is just one line in there without any line breaks:

Code: Select all

SolydK 64-bit
Now, start the constructor again, and follow the tutorial.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 24 Jan 2014 10:32

I have just updated solydxk-constructor. It should now also work with the new ISO's.
Thanks for the heads up!


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 24 Jan 2014 11:03

thanks Schoelje
how to custom kde and that configuration? i thik that must be startUp to can change any settings. i want to change firefox default Home Page and addOns.

NEW PROBLEM:
this problem is remasterd ISO. new unpack and distribution do not have this problem.
in chroot can not connect to the internet:
Image

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 24 Jan 2014 11:51

I can't reproduce that.
Make sure your [unpacked_dir]/root/etc/apt/sources.list looks like this:

Code: Select all

deb http://packages.solydxk.com/production/ solydxk main upstream import kdenext
deb http://debian.solydxk.com/production testing main contrib non-free
deb http://debian.solydxk.com/production/multimedia testing main non-free
deb http://debian.solydxk.com/security testing/updates main contrib non-free
deb http://community.solydxk.com/production/ solydxk main


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 24 Jan 2014 12:11

file that have your posted lines and no problem.

Image

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 24 Jan 2014 12:26

Can you point your browser to http://debian.solydxk.nl/production/
Can you browse the directories?


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 24 Jan 2014 12:41

Image
Image
Image

User avatar
zerozero
Posts: 5373
Joined: 10 Feb 2013 23:37
Location: West Midlands, England
Contact:

Re: Remastering SolydXK

Postby zerozero » 24 Jan 2014 20:18

tux-world
are you behind a proxy? you need to configure APT to use the proxy
see this topic where the same issue was discussed http://forums.solydxk.nl/viewtopic.php? ... 518#p23773
bliss of ignorance

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 25 Jan 2014 04:49

hi zerozero.i do not have any proxy

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 25 Jan 2014 09:34

I'm sorry, I cannot reproduce that.
The chrooted environment (the terminal you open from the constructor) gets its connection from the host.
I haven't seen this before, and I'm afraid that I can't help you much with the experience I have.


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 25 Jan 2014 09:39

then after remastering for new iso. internet connecton do not work again to new iso. ok?
thats very bad because user can not to ange change for settings.

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 28 Jan 2014 08:21

hi. after repack again SolydXk-lastest.iso and update repo.
i'm using this command for install apache2 :
apt-get install apache2
but after installing that. i get this error :(

Image

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 02 Feb 2014 19:10

I'm sorry, I cannot reproduce that.
I have tried with both SolydX, and SolydK, even with older ISO's, and I can always successfully install apache2.


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 03 Feb 2014 05:25

hi. thatks.

i use this iso for repack :

Code: Select all

tux-world@debian ~/Downloads $ ls solydk32_latest.iso -l
-rw-r----- 1 tux-world tux-world 1567621120 Nov 25 18:07 solydk32_latest.iso

tux-world@debian ~/Downloads $ md5sum solydk32_latest.iso 
a81afd19573cabab9151d9a53bcbb667  solydk32_latest.iso
is this result correct?
witch iso you do not have problem?

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 03 Feb 2014 06:22

That is not the correct md5sum that is stated on the product page: http://solydxk.nl/homeedition/solydk/
Please download from that page, and try again.


SolydXK needs you!
Development | Testing | Translations

tux-world
Posts: 31
Joined: 22 Jan 2014 19:34

Re: Remastering SolydXK

Postby tux-world » 05 Feb 2014 15:21

after redownloading the iso, check again MD5SUM and try to install apache2 faile to start service :(

tux-world@debian ~/Desktop $ md5sum solydk32_latest.iso
14fb8095ba3521db96d78b8c11c88077 solydk32_latest.iso
tux-world@debian ~/Desktop $

User avatar
Palko
Posts: 4
Joined: 22 Feb 2014 18:54

Re: Remastering SolydXK

Postby Palko » 25 Feb 2014 19:28

Please tell me: I need /in this processes/ install everything, one more time, what I have been installed in my real desktop ?
And how can I putting in my desktop enviroment (settings, colors, icons ...)?

Thank you !

User avatar
Arjen Balfoort
Site Admin
Posts: 9519
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Remastering SolydXK

Postby Arjen Balfoort » 25 Feb 2014 22:17

I understand you'd like support on this, but it's important that you have read the Opening Post (OP), and the disclaimer. If you want to use this tool to create a custom ISO, you need to know how to do that. I just provide the tool.


SolydXK needs you!
Development | Testing | Translations


Return to “Tutorials”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests