Need help testing

SolydXK is too quiet for you? SolydXK Enthusiast Editions, based on Debian Testing is for you! Here you can find news about Debian Testing and Unstable too, and also tests on SolydXK programs.
The support for SolydXK EE is provided by the community.
User avatar
ane champenois
Posts: 1539
Joined: 24 Feb 2013 08:17
Location: Grands lacs Forêt d'Orient, France

Re: Need help testing

Postby ane champenois » 20 Jun 2014 17:11

Schoelje wrote: I'll be testing a bit more, and if I have an ISO to test, I'll upload it.
It looks promising, though.
When (if) you need testing about that, I'll do it. ;)
@Grizzler: Thanks for your help. :geek:
They did not know it was impossible so they did it.

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 21 Jun 2014 11:07

With all the experimenting I messed up my ISO. I started anew from the 201405 ISO, and am now building the updated ISO.
I'll do a quick check when done, and upload the ISO if it works.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 07:39

I have split up my ISO tasks in the following priorities:
  1. Make current update work (duh!)
  2. Replace KDM with lightdm (gtk version, for consistent look)
  3. Install systemd
  4. Use Grub2 only (remove syslinux) to boot ISO, but I don't think it's worth the trouble
It now hangs on #3, systemd: the live ISO hangs on boot (finishes alright, but does not start lightdm, and startx works, but dbus throws errors).
Perhaps systemd is not ready yet for a live ISO, but I haven't had much time to investigate that.

I've uploaded the ISOs of #1, and #2: http://downloads.solydxk.nl/dev

If you want, I can upload the #3 ISO as well. Let me know.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 09:43

I also uploaded solydk32_201406_systemd-noworky.iso for those who like to puzzle with systemd :mrgreen:

On non-EFI systems it will boot without Plymouth, and with additional systemd debugging enabled.
When booted, you will find that TTY login is already displayed while debug information is still being outputted (is that English?), which results in blinking cursor at the end of the output. You can type here "root", and "solydxk" as password.

Running lightdm results in a black screen, and you need to reboot :evil:
Running startx starts KDE, but you'll get some errors and the desktop is unusable.

That's when I suspected that dbus is not started correctly. Maybe something in the start order is going wrong. I haven't found it yet, and could use some help. There is no hurry, though: we can now safely update, and that's the most important thing.

Here's some wiki info: http://www.freedesktop.org/wiki/Software/systemd/


SolydXK needs you!
Development | Testing | Translations

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 14:02

@Schoelje
  1. Well that was fun. I started this with the download of the ISO. Timestamp on my downloaded file says it finished at 0729. So, from start to post time was about 2.5 hours. Fun!
  2. Yes, that is proper English :)
  3. I believe you may be partially correct about dbus being at the root of the problem ...
The first really error messag in the log files (see /var/log/dmesg at timestamp: 10.486174) seems to indicate some sort of conflict with left over sysvinit and systemd.

Some links of interest:
>> comment 7 moght be useful? --> https://bugzilla.redhat.com/show_bug.cgi?id=689861
>> This might be even more useful --> https://unix.stackexchange.com/question ... ycle-error
>> and finally, --> http://forum.siduction.org/index.php?topic=4517.0

In the event it's useful information (of course, this is the output from a working install :) ):

Code: Select all

scott@blackbox:~$ inxi -Fxx
System:    Host: blackbox Kernel: 3.14-1-amd64 x86_64 (64 bit gcc: 4.8.3) 
           Desktop: Xfce 4.10.2 (Gtk 2.24.18) dm: lightdm Distro: SolydXK 1 testing 
Machine:   Mobo: ASUSTeK model: SABERTOOTH 990FX R2.0 v: Rev 1.xx
           Bios: American Megatrends v: 2104 date: 11/21/2013
CPU:       Octa core AMD FX-8320 Eight-Core (-MCP-) cache: 16384 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 60684 
           Clock Speeds: 1: 3792 MHz 2: 3792 MHz 3: 3792 MHz 4: 3792 MHz 5: 3792 MHz 6: 3792 MHz 7: 3792 MHz
           8: 3792 MHz
Graphics:  Card: NVIDIA GF106 [GeForce GTS 450] bus-ID: 01:00.0 chip-ID: 10de:0dc4
           Display Server: X.Org 1.15.0 driver: nvidia Resolution: 1600x1200@60.0hz, 1600x1200@60.0hz
           GLX Renderer: GeForce GTS 450/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 331.67 Direct Rendering: Yes
Audio:     Card-1 NVIDIA GF106 High Definition Audio Controller 
           driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0be9 
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA) 
           driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383 
           Sound: Advanced Linux Sound Architecture v: k3.14-1-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: b000 bus-ID: 0a:00.0 chip-ID: 10ec:8168
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: 60:a4:4c:62:25:19
Drives:    HDD Total Size: 676.1GB (46.9% used)
           ID-1: /dev/sda model: WDC_WD1600AAJS size: 160.0GB serial: WD-WCAYUN083328
           ID-2: /dev/sdb model: WDC_WD5000AAKX size: 500.1GB serial: WD-WCC2EHU07619
           ID-3: USB /dev/sdg model: STORAGE_DEVICE size: 15.9GB serial: 000000009407-0:0
Partition: ID-1: / size: 20G used: 6.6G (36%) fs: ext4 dev: /dev/sda2 
           ID-2: /home size: 112G used: 13G (12%) fs: ext4 dev: /dev/sda3 
           ID-3: swap-1 size: 17.18GB used: 0.00GB (0%) fs: swap dev: /dev/sda1 
Sensors:   System Temperatures: cpu: 19.8C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 211 Uptime: 8 min Memory: 622.6/15980.6MB 
           Init: SysVinit v: 2.88 runlevel: 2 default: 2 Gcc sys: 4.8.2 alt: 4.6/4.7 
           Client: Shell (bash 4.3.01 running in xfce4-terminal) inxi: 2.1.28 
From /var/log/daemon.log

Code: Select all

Jun 22 12:56:20 localhost cupsd[3102]: process 3102: arguments to dbus_connection_unref() were incorrect, assertion "connection != NULL" failed in file ../../dbus/dbus-connection.c line 2794.
Jun 22 12:56:20 localhost cupsd[3102]: This is normally a bug in some application using the D-Bus library.
After I played around for a while (some 5 minutes or so), I executed "startx" and played in the DE for a couple of minutes. Dropped back to the console with Ctrl-Alt-Bksp.

From /var/log/Xorg.0.log

Code: Select all

[   329.151] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   329.159] (==) No Layout section.  Using the first Screen section.
[   329.159] (==) No screen section available. Using defaults.
[   329.159] (**) |-->Screen "Default Screen Section" (0)
[   329.159] (**) |   |-->Monitor "<default monitor>"
[   329.165] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
.
.
.
[   329.253] (II) Module nouveau: vendor="X.Org Foundation"
[   329.253] 	compiled for 1.15.0, module version = 1.0.10
[   329.253] 	Module class: X.Org Video Driver
[   329.253] 	ABI class: X.Org Video Driver, version 15.0
[   329.253] (II) LoadModule: "nv"
[   329.254] (WW) Warning, couldn't open module nv
[   329.254] (II) UnloadModule: "nv"
[   329.254] (II) Unloading nv
[   329.254] (EE) Failed to load module "nv" (module does not exist, 0)
[   329.254] (II) LoadModule: "modesetting"
[   329.254] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   329.257] (II) Module modesetting: vendor="X.Org Foundation"
[   329.257] 	compiled for 1.15.1, module version = 0.8.1
[   329.257] 	Module class: X.Org Video Driver
[   329.257] 	ABI class: X.Org Video Driver, version 15.0
This, from /var/log/dmesg:

Code: Select all

.
.
.
[   10.274121] systemd[1]: Your kernel apparently lacks built-in autofs4 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
[   10.354641] systemd[1]: Inserted module 'autofs4'
[   10.366345] systemd[1]: Set hostname to <solydxk>.
[   10.368935] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
.
.
.
[   10.414007] systemd[1]: Looking for unit files in (higher priority first):
[   10.414010] systemd[1]: 	/etc/systemd/system
[   10.414012] systemd[1]: 	/run/systemd/system
[   10.414014] systemd[1]: 	/run/systemd/generator
[   10.414016] systemd[1]: 	/usr/local/lib/systemd/system
[   10.414018] systemd[1]: 	/lib/systemd/system
[   10.414019] systemd[1]: 	/usr/lib/systemd/system
[   10.414029] systemd[1]: Looking for SysV init scripts in:
[   10.414030] systemd[1]: 	/etc/init.d
[   10.414033] systemd[1]: Looking for SysV rcN.d links in:
[   10.414034] systemd[1]: 	/etc
[   10.437421] systemd[1]: Failed to load configuration for systemd-vconsole-setup.service: No such file or directory
[   10.439371] systemd[1]: Failed to load configuration for var-lock.mount: No such file or directory
[   10.439378] systemd[1]: Failed to load configuration for var-run.mount: No such file or directory
[   10.453180] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
[   10.469075] systemd[1]: Failed to load configuration for console-screen.service: No such file or directory
[   10.470644] systemd[1]: Failed to load configuration for resolvconf.service: No such file or directory
[   10.470672] systemd[1]: Failed to load configuration for systemd-networkd.service: No such file or directory
[   10.471553] systemd[1]: Failed to load configuration for keymap.service: No such file or directory
[   10.474754] systemd[1]: Failed to load configuration for nodm.service: No such file or directory
[   10.474783] systemd[1]: Failed to load configuration for wdm.service: No such file or directory
[   10.474810] systemd[1]: Failed to load configuration for sdm.service: No such file or directory
[   10.474830] systemd[1]: Failed to load configuration for ldm.service: No such file or directory
[   10.474858] systemd[1]: Failed to load configuration for xdm.service: No such file or directory
[   10.474877] systemd[1]: Failed to load configuration for kdm.service: No such file or directory
[   10.474895] systemd[1]: Failed to load configuration for gdm.service: No such file or directory
[   10.474901] systemd[1]: Failed to load configuration for x-display-manager.target: No such file or directory
[   10.475855] systemd[1]: Failed to load configuration for slapd.service: No such file or directory
[   10.475955] systemd[1]: Failed to load configuration for avahi.service: No such file or directory
[   10.476473] systemd[1]: Failed to load configuration for all.target: No such file or directory
[   10.476595] systemd[1]: Failed to load configuration for hal.service: No such file or directory
[   10.477131] systemd[1]: Failed to load configuration for clamav-daemon.service: No such file or directory
.
.
.
[   10.482502] systemd[1]: Trying to enqueue job graphical.target/start/isolate
[   10.482604] systemd[1]: Found ordering cycle on dbus.service/start
[   10.482849] systemd[1]: Walked on cycle path to dbus.socket/start
[   10.483720] systemd[1]: Walked on cycle path to sysinit.target/start
[   10.484478] systemd[1]: Walked on cycle path to solydxk-system.service/start
[   10.485329] systemd[1]: Walked on cycle path to dbus.service/start
[   10.486174] systemd[1]: Breaking ordering cycle by deleting job dbus.socket/start
[   10.486951] systemd[1]: Job dbus.socket/start deleted to break ordering cycle starting with dbus.service/start
[   10.487801] systemd[1]: Deleting job lightdm.service/start as dependency of job dbus.socket/start
[   10.487804] systemd[1]: Deleting job systemd-logind.service/start as dependency of job dbus.socket/start
[   10.487807] systemd[1]: Deleting job dbus.service/start as dependency of job dbus.socket/start
[   10.487810] systemd[1]: Deleting job avahi-daemon.service/start as dependency of job dbus.socket/start
[   10.487813] systemd[1]: Deleting job NetworkManager.service/start as dependency of job dbus.socket/start
[   10.487816] systemd[1]: Deleting job ModemManager.service/start as dependency of job dbus.socket/start
.
.
.
[   10.786861] systemd[1]: Accepted connection on private bus.
[   10.786903] systemd[1]: Accepted connection on private bus.
[   10.787086] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.787123] systemd[1]: systemd-udev-trigger.service: cgroup is empty
[   10.787245] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.787347] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.787379] systemd[1]: systemd-sysctl.service: cgroup is empty
[   10.787464] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.787491] systemd[1]: systemd-udev-trigger.service: cgroup is empty
[   10.787511] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.787537] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.787563] systemd[1]: systemd-tmpfiles-setup-dev.service: cgroup is empty
[   10.787582] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.787604] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.866781] lp: driver loaded but no devices found
.
.
.
[   10.886821] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.886928] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.890454] systemd[1]: Received SIGCHLD from PID 958 (mount).
[   10.890470] systemd[1]: Got SIGCHLD for process 958 (mount)
[   10.890485] systemd[1]: Child 958 died (code=exited, status=0/SUCCESS)
[   10.890488] systemd[1]: Child 958 belongs to dev-mqueue.mount
[   10.890493] systemd[1]: dev-mqueue.mount mount process exited, code=exited status=0
[   10.890498] systemd[1]: dev-mqueue.mount changed mounting-done -> mounted
[   10.890946] systemd[1]: Accepted connection on private bus.
[   10.891123] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.891229] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   10.904721] systemd[1]: sys-kernel-debug.mount changed mounting -> mounting-done
[   10.904726] systemd[1]: Job sys-kernel-debug.mount/start finished, result=done
[   10.905078] systemd[1]: Mounted Debug File System.
[   10.906241] systemd[1]: Received SIGCHLD from PID 957 (mount).
[   10.906257] systemd[1]: Got SIGCHLD for process 957 (mount)
[   10.906272] systemd[1]: Child 957 died (code=exited, status=0/SUCCESS)
[   10.906274] systemd[1]: Child 957 belongs to sys-kernel-debug.mount
[   10.906279] systemd[1]: sys-kernel-debug.mount mount process exited, code=exited status=0
[   10.906284] systemd[1]: sys-kernel-debug.mount changed mounting-done -> mounted
[   10.907880] ppdev: user-space parallel port driver
[   10.912752] systemd[1]: Accepted connection on private bus.
[   10.912941] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   10.913048] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
.
.
.
[   17.957772] systemd[1]: Started Recreate Volatile Files and Directories.
[   17.958111] systemd[1]: Accepted connection on private bus.
[   17.958204] systemd[1]: Accepted connection on private bus.
[   17.958243] systemd[1]: Accepted connection on private bus.
[   17.958420] systemd[1]: Accepted connection on private bus.
[   17.958488] systemd[1]: Accepted connection on private bus.
[   17.958723] systemd[1]: Accepted connection on private bus.
[   17.959616] systemd[1]: Received SIGCHLD from PID 1386 (plymouth).
[   17.959636] systemd[1]: Got SIGCHLD for process 1386 (plymouth)
[   17.959649] systemd[1]: Child 1386 died (code=exited, status=1/FAILURE)
[   17.959652] systemd[1]: Child 1386 belongs to plymouth-read-write.service
[   17.959661] systemd[1]: plymouth-read-write.service: main process exited, code=exited, status=1/FAILURE
[   17.959751] systemd[1]: plymouth-read-write.service changed start -> dead
[   17.959797] systemd[1]: Job plymouth-read-write.service/start finished, result=done
[   17.960138] systemd[1]: Started Tell Plymouth To Write Out Runtime Data.
[   17.961209] systemd[1395]: Executing: /etc/ppp/ip-down.d/0dns-down 0dns-clean
[   17.962733] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.962827] systemd[1]: Accepted connection on private bus.
[   17.962973] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.963056] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.963088] systemd[1]: Accepted connection on private bus.
[   17.963229] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.963271] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.963749] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.963823] systemd[1]: live-tools.service: cgroup is empty
[   17.963845] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.963976] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.964006] systemd[1]: systemd-tmpfiles-setup.service: cgroup is empty
[   17.964027] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.964118] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.964147] systemd[1]: systemd-random-seed-load.service: cgroup is empty
[   17.964173] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.964198] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.964235] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.964264] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
[   17.965207] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
[   17.965238] systemd[1]: plymouth-read-write.service: cgroup is empty
[   17.965258] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
This, from /var/log/kern.log

Code: Select all

Jun 22 12:48:08 localhost kernel: [  344.915809] kded4[2868]: segfault at 24 ip b6206e2b sp bff0d680 error 4 in libQtDBus.so.4.8.6[b61db000+7b000]
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluez5-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluez4-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluetooth-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Module load failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to initialize daemon.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluez5-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluez4-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluetooth-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Module load failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to initialize daemon.
From /var/log/messages

Code: Select all

Jun 22 12:48:08 localhost kernel: [  344.915809] kded4[2868]: segfault at 24 ip b6206e2b sp bff0d680 error 4 in libQtDBus.so.4.8.6[b61db000+7b000]
Jun 22 12:48:27 localhost org.a11y.Bus[2689]: Activating service name='org.a11y.atspi.Registry'
Jun 22 12:48:27 localhost org.a11y.Bus[2689]: Successfully activated service 'org.a11y.atspi.Registry'
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: ** (at-spi2-registryd:2958): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: ** (at-spi2-registryd:2958): WARNING **: Unable to register client with session manager
Jun 22 13:00:41 localhost org.a11y.Bus[2689]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jun 22 13:00:41 localhost org.a11y.atspi.Registry[2955]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
From /var/log/syslog

Code: Select all

Jun 22 12:47:55 localhost ck-launch-session: error connecting to ConsoleKit
Jun 22 12:48:08 localhost kernel: [  344.915809] kded4[2868]: segfault at 24 ip b6206e2b sp bff0d680 error 4 in libQtDBus.so.4.8.6[b61db000+7b000]
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluez5-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluez4-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to load module "module-bluetooth-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Module load failed.
Jun 22 12:48:23 localhost pulseaudio[2920]: Failed to initialize daemon.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluez5-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to get D-Bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluez4-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to load module "module-bluetooth-discover" (argument: ""): initialization failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Module load failed.
Jun 22 12:48:23 localhost pulseaudio[2937]: Failed to initialize daemon.
Jun 22 12:48:27 localhost org.a11y.Bus[2689]: Activating service name='org.a11y.atspi.Registry'
Jun 22 12:48:27 localhost org.a11y.Bus[2689]: Successfully activated service 'org.a11y.atspi.Registry'
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: ** (at-spi2-registryd:2958): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Jun 22 12:48:27 localhost org.a11y.atspi.Registry[2955]: ** (at-spi2-registryd:2958): WARNING **: Unable to register client with session manager
Jun 22 12:56:20 localhost cupsd[3102]: process 3102: arguments to dbus_connection_unref() were incorrect, assertion "connection != NULL" failed in file ../../dbus/dbus-connection.c line 2794.
Jun 22 12:56:20 localhost cupsd[3102]: This is normally a bug in some application using the D-Bus library.
Jun 22 13:00:41 localhost org.a11y.Bus[2689]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Jun 22 13:00:41 localhost org.a11y.atspi.Registry[2955]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 14:42

Thanks Scott!
In the same dmesg:

Code: Select all

Breaking ordering cycle by deleting jbo dbus.socket/start
Job dbus.socket/start deleted to break ordering cycle starting with dbus.service/start
Deleting job lightdm.service/start as dependency of job dbus.socket/start
Deleting job systemd-logind.service/start as dependency of job dbus.socket/start
Deleting job dbus.service/start as dependency of job dbus.socket/start
Deleting job avahi-daemon.service/start as dependency of job dbus.socket/start
Deleting job NetworkManager.service/start as dependency of job dbus.socket/start
Deleting job ModemManager.service/start as dependency of job dbus.socket/start
Ordering cycle is broken, and dbus not started. All dependent services are deleted.
Now, find the solution somewhere...


SolydXK needs you!
Development | Testing | Translations

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 14:58

Schoelje wrote:Thanks Scott!
Ordering cycle is broken, and dbus not started. All dependent services are deleted.
Now, find the solution somewhere...
You're welcome.

As for solution - I believe the solution may be hinted at in one of the links I supplied. I would be the second one to be the most useful.
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
zerozero
Posts: 5373
Joined: 10 Feb 2013 23:37
Location: West Midlands, England
Contact:

Re: Need help testing

Postby zerozero » 22 Jun 2014 15:07

i know it's ask a bit :lol: but this same iso with kdm instead of lightdm shows the same problems?

apparently lightdm only very recently https://bugs.debian.org/cgi-bin/bugrepo ... =733220#35 gained systemd integration
bliss of ignorance

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 15:17

zerozero wrote:i know it's ask a bit :lol: but this same iso with kdm instead of lightdm shows the same problems?

apparently lightdm only very recently https://bugs.debian.org/cgi-bin/bugrepo ... =733220#35 gained systemd integration
I didn't try KDM, but checked lightdm version, which is 1.10.1-3 (the same as in sid). All services are in place, and as you can see in the output, it's dbus not being started that prevents lightdm (and other services) from being started. I need to find the services that are contradicting the start order for dbus. Nice puzzle :mrgreen:


SolydXK needs you!
Development | Testing | Translations

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 15:20

Something else to consider .... the systemd on the iso is a bit dated. It appears that version 204-10 is available (somewhere?) versus that we have (204-8).


Also, just booted up the iso in a VM and took a look at /etc. There's an init.d just full of scripts! I don't know if any of them are referenced during the boot process (don't know in which log file to look, I'm still a noob) but .....
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 15:24

ScottQuier wrote:As for solution - I believe the solution may be hinted at in one of the links I supplied. I would be the second one to be the most useful.
I will take a look at udev.

I've searched for "dbus" in /etc/init.d/ to see which services depend on dbus:

Code: Select all

./gpsd:5:# Should-Start:      bluetooth dbus udev
./network-manager:4:# Required-Start:    $remote_fs dbus udev
./lightdm:4:# Should-Start:      console-screen kbd acpid dbus hal consolekit
./bluetooth:4:# Required-Start:    $local_fs $syslog $remote_fs dbus
./live-installer:4:# Should-Start:      console-screen acpid bootlogs dbus hal network-manager
./saned:7:# Should-Start:      dbus avahi
./solydxk-system:5:# Required-Start:    $local_fs $syslog $remote_fs dbus
./avahi-daemon:4:# Required-Start:    $remote_fs dbus


SolydXK needs you!
Development | Testing | Translations

User avatar
zerozero
Posts: 5373
Joined: 10 Feb 2013 23:37
Location: West Midlands, England
Contact:

Re: Need help testing

Postby zerozero » 22 Jun 2014 15:35

still without the iso but reading the answers here it's possible that this >> http://forum.siduction.org/index.php?to ... 0#msg38620 is somehow related?
bliss of ignorance

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 15:37

Schoelje wrote: I've searched for "dbus" in /etc/init.d/ to see which services depend on dbus:
Ummmm ...... OK. But, everything I've seen so far (and I'm just starting) seems to indicate the place to look is
  • /etc/systemd/system
  • /lib/systemd/system
Further, if I read correctly, anything init.d is a problem for systemd; init.d being a sysvinit hold-over.

But, I could be wrong about all the above.
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 15:49

@zz
Disabling cups, will try that too.

@Scott
What I understand is, that when you install systemd to replace sysvinit, it reads /etc/init.d to decide to order to start services.
I might be wrong to, but documentation is rather murky, if not ambiguous.
We'll need to tackle one problem at a time.

Now building an ISO with sid's systemd.


SolydXK needs you!
Development | Testing | Translations

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 17:12

Schoelje wrote:Now building an ISO with sid's systemd.
No change.
Now disabling cups, bluetooth, and gpsd...


SolydXK needs you!
Development | Testing | Translations

User avatar
grizzler
Posts: 2186
Joined: 04 Mar 2013 15:45
Location: The Hague, NL

Re: Need help testing

Postby grizzler » 22 Jun 2014 18:39

The problem is here (part of dmesg):

Code: Select all

[    9.906240] systemd[1]: Found ordering cycle on dbus.service/start
[    9.906368] systemd[1]: Walked on cycle path to dbus.socket/start
[    9.906456] systemd[1]: Walked on cycle path to sysinit.target/start
[    9.906543] systemd[1]: Walked on cycle path to solydxk-system.service/start
[    9.906633] systemd[1]: Walked on cycle path to dbus.service/start
[    9.906718] systemd[1]: Breaking ordering cycle by deleting job dbus.socket/start
That is read from bottom to top, so the issue is solydxk-system (i.e. /etc/init.d/solydxk-system).

Try this: start the iso, login and enter:

Code: Select all

systemctl stop solydxk-system
systemctl disable solydxk-system
systemctl restart dbus
lightdm
You may have to press enter twice after restarting dbus to get a new line for the final command.

Don't ask me what exactly is wrong with /etc/init.d/solydxk-system. I know nothing about computers... :lol:
Frank

SolydX EE 64 - tracking Debian Testing

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 19:40

Did as grizzer suggested, except I executed

Code: Select all

lightdm &
At that point X started, the KDE splash screen loaded and, eventually, the DE started. I even have network connectivity.
So, I went and got all the log files I could find .... and attached them below.

I think I may have found it. This is the contents of solydxk-system. Read very carefully the "Provides" line .... Is that the issue, solidxk-system vs. solydxk-system?

Code: Select all

cat solydxk-system 
#! /bin/sh

### BEGIN INIT INFO
# Provides:          solidxk-system
# Required-Start:    $local_fs $syslog $remote_fs dbus
# Required-Stop:     $local_fs $syslog $remote_fs
# Default-Start:     S
# Default-Stop:  
### END INIT INFO

/usr/lib/solydxk/system/adjust.py
But, if so, why does the same thing (exact same file) work in my working install?

And, is this strange:

Code: Select all

solydxk ~ # systemctl status solidxk-system
solydxk-system.service
   Loaded: loaded (/etc/init.d/solydxk-system)
   Active: inactive (dead) since Sun 2014-06-22 19:41:43 UTC; 14min ago
  Process: 1674 ExecStop=/etc/init.d/solydxk-system stop (code=exited, status=0/SUCCESS)
  Process: 802 ExecStart=/etc/init.d/solydxk-system start (code=exited, status=0/SUCCESS)

solydxk ~ # systemctl status solydxk-system
solydxk-system.service
   Loaded: loaded (/etc/init.d/solydxk-system)
   Active: inactive (dead) since Sun 2014-06-22 19:41:43 UTC; 14min ago
  Process: 1674 ExecStop=/etc/init.d/solydxk-system stop (code=exited, status=0/SUCCESS)
  Process: 802 ExecStart=/etc/init.d/solydxk-system start (code=exited, status=0/SUCCESS)

solydxk ~ # 
I get the same response to a "status" query regardless of the "i" vs "y" thing. I'm in way over my head here....
Attachments
LogFiles.tar.gz
(64.25 KiB) Downloaded 44 times
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 22 Jun 2014 20:17

I can confirm that the ISO booted with solydxk-system disabled.
That's another one you solved, Grizzler, thanks again!

Now I'll have to change the start order on solydxk-system...


SolydXK needs you!
Development | Testing | Translations

User avatar
ScottQuier
Posts: 1781
Joined: 18 Jul 2013 15:55
Location: Newport News, VA

Re: Need help testing

Postby ScottQuier » 22 Jun 2014 21:26

And, what was my contribution? Chopped liver? :D :lol: Which, for those not American, is not well thought of. j/k of course!
Scott
Quoting zerozero, "The usage of PPA's in debian-based
systems is risky at best and entails serious compatibility
problems; usually it's the best way to destroy an install"

User avatar
Arjen Balfoort
Site Admin
Posts: 9365
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: Need help testing

Postby Arjen Balfoort » 23 Jun 2014 04:55

:lol: and of course, yours, and everybody else's contribution was very much appreciated as well!


SolydXK needs you!
Development | Testing | Translations


Return to “Testing Zone”

Who is online

Users browsing this forum: No registered users and 3 guests