wayne@solydxk ~ $ inxi -F
System: Host: solydxk Kernel: 3.16.0-4-686-pae i686 (32 bit) Desktop: N/A
Distro: SolydXK 1 testing
Machine: Mobo: ASUSTeK model: P5G41T-M LE v: Rev X.0x
Bios: American Megatrends v: 1001 date: 08/02/2012
CPU: Quad core Intel Core2 Quad Q8400 (-MCP-) cache: 2048 KB
Clock Speeds: 1: 2003 MHz 2: 2003 MHz 3: 2003 MHz 4: 2003 MHz
Graphics: Card: NVIDIA GT218 [GeForce 210]
Display Server: X.Org 1.16.4 driver: nvidia
GLX Renderer: GeForce 210/PCIe/SSE2
GLX Version: 3.3.0 NVIDIA 340.76
Audio: Card-1 Intel NM10/ICH7 Family High Definition Audio Controller
Card-2 NVIDIA High Definition Audio Controller
Sound: Advanced Linux Sound Architecture v: k3.16.0-4-686-pae
Network: Card: Qualcomm Atheros AR8131 Gigabit Ethernet driver: atl1c
IF: eth0 state: up speed: 1000 Mbps duplex: full
Drives: HDD Total Size: 1500.3GB (0.6% used)
ID-1: /dev/sda model: ST31500341AS size: 1500.3GB
Partition: ID-1: / size: 45G used: 5.2G (13%) fs: ext4 dev: /dev/sda8
ID-2: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap dev: /dev/sda7
Sensors: System Temperatures: cpu: 39.0C mobo: 40.0C gpu: 47C
Fan Speeds (in rpm): cpu: 1214 sys-1: 1205
Info: Processes: 177 Uptime: 19 min Memory: 472.4/4049.0MB
Client: Shell (bash) inxi: 2.1.28
wayne@solydxk ~ $
Captured some pics
1. First boot into old 586 single core kernel
then scroll till Hardware Driver installation, select both nVidia and PAE
2. after a very very long time, it showed this pic.. need to reset
3. after reset , showing this, nVidia installed, PAE not yet
so select PAE to install kernel
after quite a long wait, finally installed PAE and need to reset
After reset, it seems all working. with pae kernel and nVidia driver.
There is one thing I like about vanilla Debian installer, it automatically detect the CPU is pae capable and install the pae kernel together with a default kernel, save some works and time, with a nett effect of faster response and cooler CPU temperature. It can be as much as 15 degC difference between single core versus 2/4 core.
Did some quick change on xfce menu , to deskbar, add some items like sensors, cpu freq etc.
No issue on this, click click click, drag-drop...
Add duinsoft repos to manage update-sun-jre
I have used this method for more than two years on all sorts of Debian , wheezy, jessie, sid and it always works so I add this to Solyxee.
I know some say openjdk or icedtea but I always have trouble using them with the bank website that has 'streaming data'.
No issue to install..
However, the issue is, on the usual bank website, java does not start, after clicking ' streaming'.
How do i go about resolving this issue?
after I click updat manager...
I saw this
What is the issue and resolution?
I have not yet test if this is 'UEFI capable'..it will be better if it support UEFI evn on 32 bit as Debian Jessie release note said so.
Thank you for the test iso..