SolydXK 10 Testing [updated: 31-07-2019]

SolydXK is too quiet for you? SolydXK Enthusiast Editions, based on Debian Testing is for you! Here you can find news about Debian Testing and Unstable too, and also tests on SolydXK programs.
The support for SolydXK EE is provided by the community.
User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 31 May 2019 23:08

USB-creator has always been a great tool for multiboot. I've had no problems using it for the EE ISOs. I haven't had time to test it with the new ISO though. Writing the stick some times hangs as troypulk said but a repair run fixes everything. At least don't remove it from the repo.

Edit: Never problems with booting from USB-Creator with EFI or without.

Do you have any recommendation what to use instead of USB-creator? The one from mint? One stick for every image is absolutely no alternative given the usual size of pen drives today. And I would hate going back to burning DVDs.

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 01 Jun 2019 00:53

I think the whole issue with the USB-Creator is that it only works right when you're using a Legacy BIOS/Hardware, it has worked for me now twice with no issues.

I'll be saving the Solydx_10_64_201905.iso so I won't lose it.

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 06 Jun 2019 12:26

SolydX ISO installed without issues in VM - no EFI.

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 10 Jun 2019 04:59

Setting up L2TP with IPsec for the second time.

I did this in SolydX 8 with no problems now that I'm doing it on SolydX 10 nightly I can't seem to get it to work this time.

Any idea why it's not working?

I'm thinking to go back to a non nightly maybe solydxee_10_64_201902 and keep going back until it works.

I followed these instructions.
Install network-manager-l2tp:

install network-manager-l2tp-gnome

Navigate to Settings > Network > Click the + button > Select "Layer 2 Tunneling Protocol (L2TP)"

Name the new VPN connection something

Put the host name or address in the Gateway field.

Put username in the Username field.

Click the icon in the Password field and select your preference for how to supply the password.

Click IPSec Settings...

Click the box for "Enable IPsec tunnel to L2TP host"

Enter the shared secret into the Pre-shared key field.

Leave the Gateway ID field empty. (I did this with and with out the IP address)

Expand the Advanced options area

Enter "3des-sha1-modp1024" into the Phase 1 Algorithms box.
Enter "3des-sha1" into the Phase 2 Algorithms box.

Leave the box checked for "Enforce UDP encapsulation". (I did this as checked and unchecked)

Click OK.

Click Save.

Open a terminal and enter the following commands to permanently disable the xl2tpd service: (Some times I did this and sometimes not)
sudo service xl2tpd stop
sudo systemctl disable xl2tpd

Open Network Settings and try to turn the VPN on.

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 10 Jun 2019 15:14

There's a report about annoyances here: viewtopic.php?f=43&t=7549.

Regarding swap: Laptops with hibernate need swapsize = ramsize even if they have 64GB of RAM but every other computer with ramsize >= 16GB probably needs no swap at all. Just a thought. And ZRAM was brought up again.

Regarding panel: 100% should be the default on SolydX because that's the conservative setting people are expecting and used to. It's really easy to shorten it later. mhwelsh did not manage to get the short one to 100% later. Maybe don't change defaults if everybody likes them?

No idea why he had problems with SolydK as a single system. But maybe somebody could test that again?

User avatar
escolar
Posts: 135
Joined: 23 Aug 2013 08:14
Location: Spain

Re: SolydXK 10 Preview and Testing

Postby escolar » 12 Jun 2019 19:59

I try to run the Solydk iso in Virtualbox.
It boots, and writes a lot of the boot sequence, but after writing something about the color profiles (I think with OK) the screen turns black and nothing happens.

User avatar
palimmo
Posts: 820
Joined: 19 Nov 2013 19:44
Contact:

Re: SolydXK 10 Preview and Testing

Postby palimmo » 14 Jun 2019 05:59

Is it planned a restyling (background, theme, icons, etc.) for solydxk 10 in comparison with solydxk 9?
Proud user of SolydK!

Dai diamanti non nasce niente, dal letame nascono i fior. http://aquilone.wordpress.com/

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 14 Jun 2019 08:36

No, there are too many technical issues that need to be resolved and changing the design takes a lot of time.

However, I'm open to suggestions and volunteers ;)


SolydXK needs you!
Development | Testing | Translations

User avatar
tek10
Posts: 42
Joined: 30 Jul 2013 01:22
Location: Cascadia

Re: SolydXK 10 Preview and Testing

Postby tek10 » 18 Jun 2019 00:59

I completed the attached test sheet with the Solydx install from my last post.

I'm unable to change my user icon. The error: Failed to execute child process "mugshot" (No such file or directory). Mugshot is not installed or available in Synaptic.

Overall the system works great.

SolydXK ISO test caseby tek10.ods
(27.63 KiB) Downloaded 21 times

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 18 Jun 2019 02:27

In the package updater icon in the tool bar there is an option to install when you click on it.

It says in the preferences "Command for installing updates"

What would that command be?

I'm guessing it's not apt-get install or is it?

Thanks

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 18 Jun 2019 06:25

@tek10
For the time being, I've uploaded mugshot from sid to our repostory. I haven't tested it, though.

Code: Select all

apt update; apt install mugshot --no-install-recommends
@troypulk
Is the updater not functioning without?


SolydXK needs you!
Development | Testing | Translations

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 18 Jun 2019 08:14

I just installed on an older computer, non EFI. Both HDDs were empty to start with. Boot stick was created with USB creator - as usual install on the stick hang and I had to do a repair run on the stick. Bootup went without problem (after convincing the mainboard to see the stick).

1. background image did not adapt to 15" monitor
2. Window where the user name had to be entered, jumped in between fullscreen and normal whenever I entered the letter "f" - which is confusing if the username or password has many f's. It's also generally weird.
3. Automatic partitioning set root size to 15 GB on a 250GB HDD which is a bit small to my liking
4. Also automated partitioning created 3 partitions on the second HDD, among them a second swap, that insisted on being mounted. I had to manually change the type to stop that.

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 18 Jun 2019 08:59

ilu wrote:
18 Jun 2019 08:14
I just installed on an older computer, non EFI. Both HDDs were empty to start with. Boot stick was created with USB creator - as usual install on the stick hang and I had to do a repair run on the stick. Bootup went without problem (after convincing the mainboard to see the stick).
I'm working on that.
ilu wrote:
18 Jun 2019 08:14
1. background image did not adapt to 15" monitor
There are several sizes backgrounds in /usr/share/xfce4/backdrops but I don't know how to force Xfce (I assume you tested SolydX10) to pick the right one.
ilu wrote:
18 Jun 2019 08:14
2. Window where the user name had to be entered, jumped in between fullscreen and normal whenever I entered the letter "f" - which is confusing if the username or password has many f's. It's also generally weird.
I had to search in some very ancient source but I found it and removed the code. Next version needs more changes and testing, though.
ilu wrote:
18 Jun 2019 08:14
3. Automatic partitioning set root size to 15 GB on a 250GB HDD which is a bit small to my liking
How much would be better?
ilu wrote:
18 Jun 2019 08:14
4. Also automated partitioning created 3 partitions on the second HDD, among them a second swap, that insisted on being mounted. I had to manually change the type to stop that.
That really shouldn't happen. It has probably never been tested with more than one disk.
So, what to do with the second disk then? Nothing (safest)? Format and mount? Format but do not mount?


SolydXK needs you!
Development | Testing | Translations

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 18 Jun 2019 09:24

Root size: After using stretch for 2 years I ended up with about 13 GB. Jessie was only 10 GB. And I'm never installing recommends. So there seems to be a slight upwards tendency. Running out of space on root is bad and modern disks are reasonably big, so I'd think 20 or 30 GB maybe?

The 2nd HDD ended up as a perfect mirror of the first one which doesn't make sense: Either asume the second disk is one big data sink or do nothing and give a hint ("Use manual partitioning") or ask. Do nothing is probably easiest. Hint and possibility to partition and mount manually.

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 19 Jun 2019 00:46

Arjen Balfoort wrote:
18 Jun 2019 06:25
@troypulk
Is the updater not functioning without?
Correct but it's an older version = SolydX EE 10 May 2019 and I just realized I should of asked this in a different thread.

This is the topic I asked at the beginning of this thread so I installed it on my laptop and it worked okay but I had to downgrade to get the L2TP with IPsec to work.

So right now I'm just looking for the command line for the updater icon so I can click it to install software.

Thanks

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 19 Jun 2019 10:02

I'm seeing the same issue with the update indicator on a May image VM. Missing conf file maybe? Can't check the June image install at the moment.

Edit: Right, nothing under ~/.config/package-update-indicator/, May image install. A skel file is also missing.

User avatar
Arjen Balfoort
Site Admin
Posts: 9333
Joined: 26 Jan 2013 19:36
Location: Netherlands
Contact:

Re: SolydXK 10 Preview and Testing

Postby Arjen Balfoort » 19 Jun 2019 16:47

ilu wrote:
19 Jun 2019 10:02
May image install. A skel file is also missing.
We never needed one. I don't have much time to figure out how to configure that. So, if somebody has the time to check that out, I'd very much appreciate that.


SolydXK needs you!
Development | Testing | Translations

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 19 Jun 2019 17:51

I'll look into it. Here's an unsolved post about the problem https://debianforum.de/forum/viewtopic.php?t=172036.

The developer has deprecated pk-update-icon in favor of his new project package-update-indicator. Actually pk-update-icon in buster is now only a dummy package for package-update-indicator.

From upstream https://code.guido-berhoerster.org/proj ... indicator/ I can gather that the "Update installer command" needs to be set. Setting "gpk-update-viewer" will create the conf file but still doesn't work.

Don't know whether this helps:

Code: Select all

package-update-indicator --debug
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.899: property "update-command" set to "gpk-update-viewer"

(package-update-indicator:2011): Gtk-WARNING **: 20:06:58.910: Theme parsing error: gtk.css:337:24: Invalid name of pseudo-class
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.954: indicator icon: system-software-update, notification title: "", notification body: ""
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.959: backend: aptcc
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.959: roles: cancel;depends-on;get-details;get-files;get-packages;get-repo-list;required-by;get-update-detail;get-updates;install-files;install-packages;install-signature;refresh-cache;remove-packages;repo-enable;resolve;search-details;search-file;search-group;search-name;update-packages;what-provides;download-packages;get-old-transactions;repair-system;get-details-local;get-files-local;repo-remove
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.959: network-state: online
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.963: property "refresh-interval" set to 86400
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.964: property "use-mobile-connection" set to false
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.964: state initial -> up-to-date
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.967: indicator icon: system-software-update, notification title: "Up to Date", notification body: "The system is up to date."
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting HTTP proxy to "(null)"
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting HTTPS proxy to "(null)"
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting FTP proxy to "(null)"
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting SOCKS proxy to "(null)"
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting the list of download IPs which should not go through a proxy to "(null)"
(package-update-indicator:2011): package-update-indicator-DEBUG: 20:06:58.968: setting the PAC string to "(null)"

(package-update-indicator:2011): Gdk-CRITICAL **: 20:06:59.156: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
Edit: After testing again the preference setting worked: gpk-update-viewer @Arjen

~/.config/package-update-indicator/package-update-indicator.conf

Code: Select all

[General]
update-command='gpk-update-viewer'

User avatar
ilu
Posts: 2541
Joined: 09 Oct 2013 12:45

Re: SolydXK 10 Preview and Testing

Postby ilu » 23 Jun 2019 20:32

See SolydX package check here: viewtopic.php?f=78&t=7567&p=70396#p70396

And please don't forget to add the ~/.config/package-update-indicator/package-update-indicator.conf for the update icon, I've edited my previous post.

User avatar
troypulk
Posts: 163
Joined: 20 Jul 2014 22:43
Location: Washington State, USA

Re: SolydXK 10 Preview and Testing

Postby troypulk » 08 Jul 2019 00:29

Just installed the latest solydx_10_64_201907.iso dated july 5th

after running apt-get update I get the following at the end:

Code: Select all

N: Repository 'http://security.debian.org buster/updates InRelease' changed its 'Version' value from '' to '10'
E: Repository 'http://security.debian.org buster/updates InRelease' changed its 'Suite' value from 'testing' to 'stable'
N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.


Return to “Testing Zone”

Who is online

Users browsing this forum: No registered users and 7 guests